Search results

Is the engine running. B3 do not like to shift if engine is not running.

I am on my second year and can not seem to find the sweet spots: 2004 34 PC with 496mags and BIII. I have read a figured out some of the trim and that the boat likes RPMs so I now mostly run between 3400 - 3600 giving me 29-33 mph and really close to 1 mpg usage. Where I seem to be struggling...

Just replace mine in a 2004 34PC last night used this. This is a little small width but rest fit real good.

We brought our new too us down from Algonac MI last Saturday.

Thanks, actually they light I am referring to are the two that are in front of the hatch. They are directional and not inserted like the other. But thanks for the link as I have a bad fixture in Head that needs a new one and looks like the link you sent will work.

I am looking to replace the two light that are at the front of the V Berth. The current ones are very hot and uncomfortable to have on when sitting up. Looking to go with LED, has anyone done this and would they have the replacement bulb number.

It is official today, proud new owners of a 34 PC, moving up from a 330ss. Excited for the new boat, but will miss driving the 330 as that was a fun boat to drive!

Looking for Marine Surveyors in Harrison Twp MI area, any suggestions? Kind of on a time crunch with Pre approval. Thanks.

You should be able to adjust the length on the straps with the small metal buckles in them, and yes the straps are normally kind of tied to the bar, the strap should be on continuous loop and the loop the clip end through the other side, this allows for side to side adjustment of the straps in...

330 SS 98, I have this box in the cabin, opened it thinking it might be 110vac, but came out with Red and Black and White Tied together. No voltage on any wire AC or DC. Dose anyone know what this is or was?

TurboJoe - Is this the actuator that you have? If so what are you looking to get for it?

Boat is a 330 ss with 7.4 MPI. I have an oil leak on my power steering actuator, i have it removed except for the cable. For the life of me I can not see how to disconnect the cable from the actuator. I hace the connection nut all the way off but where ther cable goes into the actuator is still...

Did the 2019 boat launch today and had an issue that took me by surprise and want to get some input too the cause. Info on engines Mercruser 7.4L MPI 1998, I changed fuel filters this winter and did not pre fill them. While in the slings, i fire up the engines with throttle at idel, Port...

The last production Fas Tech leaves the Formula factory today! End of a Era, they are a beautiful boat.:confused:

Found this at an open house past weekend, have not seen this option before but seemed like a nice alternative for those who want seadeck but do not want to glue down. Would be easier to take out and deep clean on occasion and repairs if stained or damaged would be simplified.

Ill add one too! Hopefully not the last but with weather up here your never sure.

This is the way my 330 was set up last winter, the blocks carry the majority of the weight, very stable worked on her all winter.

Here you go, 330ss

I redid the out drives this winter, and the trim senders and limits. Got everything back together the other night and while trying to calibrate the senders had one trim act flaky and the other no responce! These are the VDO white units, touched base with TAG and suggested rebuild shops. Has...

New Empty Nester: I used the Aurora Anti Fowling wax on two of my previous boats but on my 2015 238 Monterey for 3 seasons, boat was in water from first week end in april till end of October, except for the first year we bought her, that was June 4th. I boat out of Sandusky Bay Ohio, Lake...