Power Play
New member
Update- I installed horizontal plates above the exhaust ports on my 1998 41Pc in an effort to reduce or eliminate the collection of soot which occurs on the sides of the hull. Th plates are approximately 30" long and 8" wide. At the lead end they begin even with the flare of the hull (just under the chine) forward of the ports and run aft.
The plates are secured through the underside of the chine with 4" reveal outboard the chine. The result was a reduction of, but not the complete elimination of, the soot. The 4" is adequate to direct the exhaust away from the hull and dissipate it, but, when going through rougher water the rise and fall of the boat stll allows exhaust to travel forward of the plates thereby allowing some exhaust to rise up along the hull and collect.
No downside , and have reduced the collection by maybe 50%, but I am still investigating other alternatives to eliminate it completely.
The plates are secured through the underside of the chine with 4" reveal outboard the chine. The result was a reduction of, but not the complete elimination of, the soot. The 4" is adequate to direct the exhaust away from the hull and dissipate it, but, when going through rougher water the rise and fall of the boat stll allows exhaust to travel forward of the plates thereby allowing some exhaust to rise up along the hull and collect.
No downside , and have reduced the collection by maybe 50%, but I am still investigating other alternatives to eliminate it completely.