Recent content by Advantage

Wilks, I have the same generator and she is definitely cold blooded. I have the same clicking noise which is normal during preheat. I replaced both relays in the generator this spring thinking my pre-heat relay was bad. There is one for starting and the other for preheat that activates the fuel...

Hey, have a couple of questions. For the facts, I have a 2007 Formula 400SS with VP 350?s mated to DPH-A drives. I replaced the cone clutch and fork on the starboard drive last season. I seem to be losing a little drive lube from my starboard drive the last couple of weeks. It wasn?t obvious at...

Gents, can anyone tell me the different batteries and their purpose on my 2007 Formula 400SS with VP diesels and genset? I lost my windlass this weekend due to a dead battery of 2-years old. Not fun cranking 60' of chain and anchor in by hand. Also wondering if I may have a shore power charger...

Hey, I have an issue and hoping you could point me in the right direction. I have DPH-A drives mated to D6-350's. The issue is on the starboard-side trim. When I enter "beach-mode", it seems to be blowing the trim relays both up and down. This has happened twice. I replaced the relays and it...

Looking good Wilks! I also had Plasdeck on my swim platform. It looked great but too hot to walk on with bare feet. What sense does that make in a boat? Can't walk or sit on the swim platform in the sun and with kids is a no go. We also installed Aqua Traction last year. The owner is local to us...

Gents, does anyone know if other brands of chain/rode counter sensors and magnets will work with Lewmar? My chain counter is 2007 (part #68000600) isn't counting so I ordered a new kit from Lewmar. The problem is that the kit didn't come with the plastic sleeve that the sensor or reed switch...

Marina will not let me put a lift in my slip. Don't really want to bottom paint my boat if I don't have to. My marina is thinking of letting me use a Fab Dock system as an alternative to a lift. Anyone here use one? If so, are you happy with it? Reliable? Convenient? How long for the stern...

I have a 2007 Formula 400 SS with Volvo Penta diesels. I boat 100% in freshwater. I don't have an option to put a lift in my marina. So, I really have no choice but to bottom paint the boat as it sits in the water for 6-7 months. FYI -- My boat does 40-41 knots (46-47 mph) regardless of weight...

Okay, more details of this and what we've done to date. The clutches did not work! Apologize for the long note but could use some help. And yes a VP service technician is on the case with no luck. Okay, I have a 2007 Formula 400 SS with Volvo Penta D6-350s and DPH-A drives. Engines have 420...

Okay, so I had a temperature spike recently and could use your help diagnosing the problem. I got this spike when going at idle speed. I immediately turned off the engine and notice a loss of coolant. Maybe about 1/2 to 3/4 gallons. I figured it must be an impeller since it I got the spike at...

Anyone interested in our sea grass for a Formula 400 SS. Came out of a 2007. We installed new flooring this summer and do not need it. Please let me know if you're interested before I list if for sale.

I am having some intermittent shifting issues with my D6-350 / DPH drives. Thing runs and shifts great when it´s cold, but as soon as the boat gets to operating temperature the issues starts to occur. At times, the starboard drive will not engage forward (from neutral). The port side shifts all...

Gents, I have a quick question. Does anyone know if I can transport a 2007 400 SS with hardtop without removing the Raymarine radar off the top? Would a lowboy trailer do the trick? Thanks for your help.

Looking for suggestions on making the aft cabin bedding more comfortable in our 400 SS? We spend most weekends on the boat and the bed is just too hard for my liking. Has anyone replaced the factory mattress or added a layer to it? Thanks for your help.

Anyone replace their swim ladder on a Formula 400 SS? Mine is a 2007. The original OEM part is $630.00. I am sure I can find a direct replacement for much cheaper. Thanks for your help guys.