Beautiful job. I also made a new dash this winter. 12" Garmin on the far left, both tachs on lower center. The rest is blank for now. I love what you've done and will looking to this for inspiration.
It has the standard depth transducer but I'm looking to get an improved image for a garmin 1243xvs. Hate to add any holes in a boat if it can be avoided. Thanks for replying.
Looking for a advice on a transom mount transducer for a 370ss. best type and location to mount it in to work with my Garmin1243xsv. trying to avoid interference from the stepped hull. Thanks
I'm looking to replace my shift and throttle cables on my 02 370ss. The "uflex mach cable" or the Teleflex "extreme" is one better than the other and why. Thanks.
Has anyone had any luck repainting the arch. My 02 370ss has some flaking and bubbling on the arch.
Would like to find the method of sanding, filling and painting with correct color code and materials .
My kohler 7.3 will not run unless starter switch is held . It makes proper voltage but shuts down as soon as start is released. I've disconnected the oil sender and the temp sender in the exhaust outlet but still no luck.
I was told it might be a circuit board due to the fact LED#4 is not...
Hi , I am adding a 12 vdc/ USB acc. plug to the cabin. Running the hot side through a new breaker.
where do I connect the neg leg? I see a white buss bar and the green buss bar behind the breaker panel. Is the white A/C neutral only? Is the green just A/C ground? I do not want to upset the...
I've had a few people ask me if my 02 496 ho mags have had the update when I was telling them about belt shavings /dust in the bilge. They didn't know what the update was but had heard of one. Is there a bulletin from Merc or Formula on this issue? Thanks.
I developed a p/s leak behind the port engine. hard to see where the connection is bad (cooler,hose) has anyone bypassed the p/s pump with a different belt set up?
I also had a idler go bad and tossed a belt. who is making the best idler replacements?
My 02 370ss has a 3 position ( on/off/on) for the volt meter . the upper is empty the lower is for the meter. Is this how Formula wired it? Should I move the volt meter to ignition side of key switch and do away with the switch? Thanks
Has anyone made a fuel crossover on a 370ss? A friend with a 31 pc lost his port engine and then ran out of fuel trying to come home on on the starboard engine.
Seems a simple crossover set up would have worked.
Is there a trick for getting the lower slide out of the track? uppers came right out but the steps on the lowers lock it into the track. I didn't want to start prying it out in this cold CT weather. I didn't see this addressed in earlier threads. Thanks.
Has anyone used a solar panal kit while out on the hook? I spent a week in Block Island and had to run the gen 2 hours twice a day on my 370ss.
I was thinking a solar set up layed out on the deck might be enough to keep up with the 2 fridges and reduce gen time.