I got some time to troubleshoot it this afternoon. First thing I checked was the strainer and found a ton of gunk and what looks like plastic shavings that had been in there awhile. This surely wasn't helping things.....
Put it all back together, hit the pump............ Still no water from the sink/transom shower, just pump noise ???
So I pulled the water line feed to the strainer/pump again and with no water coming out figured it was blocked. So I tried blowing into it like I was blowing up a balloon hoping to free up whatever might be in there. After a couple seconds of that I hear bubbles from the water tank and stopped. Now I hear air/gurgling water followed by free flowing water from the tank. After getting wet from this I quickly screwed it back into the strainer.
Went and hit the pump and again..... STILL no water from the sink/transom shower, just pump noise ??? :-\
I figure the pump may need to be primed cause I could see water and air at the strainer
Not sure the best way to do this so I turned the pump on, turned the sink on and basically sucked on the end of the faucet like a straw for a few seconds
At which point the pump noise changed, I stopped sucking and a couple seconds later I had water flowing into the sink! Checked the transom shower and it also worked!!!
FIXED ;D
Now my only question is why I have pink water? I'm guessing it's some kind of winterizing thing I'm not familiar with (I live in SoCal) Any ideas?
Oh and thanks for the responses guys!!!
Andy
For future reference I have a SHURflo pump model# 2095-423-244 and SHURflo accumulator model# 181-203
and here is a pic of what I believe to be the factory setup: