310 OB Helm size
- Thread starter AllDodge
- Start date
310SS Helm. Twin OB. Not sure I understand the question
Attachments
AllDodge
Well-known member
Formula responded and set me what is used. The 310 OB uses steer by wire so it's different then what I'm looking at.
The steer by wire and the hydraulic/electric steering, both use the same steering cylinders, just control is different. I was hoping Formula did it the same why but not so lucky
I have twin 250's and 2 steer cylinders. According to the manual 2 cylinders are needed for 350hp and up, so I'm over kill. Wouldn't be so bad if Chap installed a 50cc helm but it's looking more like they used a 40cc helm.
Single cylinder and 40cc helm gives 4 turns lock to lock (LTL). Two cylinders and 50cc helm gives 6.5 turns LTL. I'm getting 8 turns so my guess is they installed a 40cc helm. I'm thinking about removing one of the steer cylinders
The steer by wire and the hydraulic/electric steering, both use the same steering cylinders, just control is different. I was hoping Formula did it the same why but not so lucky
I have twin 250's and 2 steer cylinders. According to the manual 2 cylinders are needed for 350hp and up, so I'm over kill. Wouldn't be so bad if Chap installed a 50cc helm but it's looking more like they used a 40cc helm.
Single cylinder and 40cc helm gives 4 turns lock to lock (LTL). Two cylinders and 50cc helm gives 6.5 turns LTL. I'm getting 8 turns so my guess is they installed a 40cc helm. I'm thinking about removing one of the steer cylinders
