350ss- removing rear sunpad cushions

[LaserK04]

I need to reupholster the rear facing sunpad/lounge cushions at the swim platform this winter, and cannot find obvious access to remove the hinge pins holding these 2 pieces in place. I may need to remove the engine hatch insulation, but certainly do not want to touch that if there is another method. Boat is a 2015.

 

[Fossil Fuel]

Formula has a habit of hiding screws between cushions. Anywhere that two cushions meet together spread that seam apart and look for Phillips head screws.

 

[jwguard]

I have a 2010 350SS and had to remove the rearward facing seat to replace the hinges, reenforce them, and reupholster the seat. I’m not sure how much the designed has changed in 2015. I had to pull down some of the foam insulation in the engine compartment to get to the screws holding the armrests. Be careful not to drop any screws, you’ll see how easy that is to do. The foam can be easily glued back with spray contact glue. Formula sells the original seat skins.