Exhaust manifold and elbow torque spec for 07 34 PC?

[vmaxhp]

Eng Serial number 0w676269
Anyone? Manual #30 is for an older engine.
Thanks!
Rick

 

[AllDodge]

While the manual you have is not 100 percent for your year, bolts, nuts and torque values for them remain the same. The torque spec for a 3/8x16 bolt is the torque spec for a 3/8x16 bolt. As things change with electronics and other things, a given steel bolt will always remain the same

 

[vmaxhp]

Thanks! Interesting on my engine's these are metric bolts. M8 x 1.25 thread pitch.

While the manual you have is not 100 percent for your year, bolts, nuts and torque values for them remain the same. The torque spec for a 3/8x16 bolt is the torque spec for a 3/8x16 bolt. As things change with electronics and other things, a given steel bolt will always remain the same

 

[AllDodge]

Used the 3/8x16 because that's what I'm use to. Just looked up the first serial number 496 and your serial number and both show M8 bolts.

http://www.mercruiserparts.com/496-mag-base-model