Has anyone recently replaced insulation on roof of engine hatch?

[seadoc]

Info to replace engine hatch insulation 2005 37 pc

 

[Comodave]

I did my 41PC a couple of years ago. There is a thread on how I did it here. Probably 2 years ago.

 

[GSENT]

Ethel, Here is Dave's post.

Sound insulation 41PC

One of our projects this winter is to replace the woefully inadequate sound insulation that Formula installed in our 41PC. The factory insulation was .5? foam with some type of vinyl covering that might as well have not been there for all the good it does, or doesn?t do. With the Cummins...

www.formulaboatsforum.com

 

[seadoc]

How did you remove the old insulation?

 

[seadoc]

Thank you Gsent for info My Tech is reluctant but

 

[Comodave]

I took the old insulation off with a putty knife. Why would someone be reluctant to do this, it is really easy.

 

[seadoc]

Have to remove the hatch or just scrape upside down & curse ? lol

 

[Comodave]

I did the work in place. I used some various pieces of wood to hold it in place while the PSA and epoxy setup. I used a couple of ratching rods to hold the wood up n place. It really was pretty easy to do.

 

[seadoc]

Thank you for your replies....