formula280ss
New member
We noticed our gear oil lube bottle monitor reservoir was a little low fallowed the hose back to transom sore enough a leak, the 90 Degree quick connector to transom (Where it connects to gear lube reservoir fitting) the Nylon hose clamp had broken, can’t tell if the quick connector is Brocken were hose connects so ordered new,
My question is I don’t want to remove hoses or start tearing things thinks apart. I can’t seem to get my hands to the quick connector but get very close,
I can get a screw driver to hit quick connector release clip, but putting back on?
My question is I don’t want to remove hoses or start tearing things thinks apart. I can’t seem to get my hands to the quick connector but get very close,
I can get a screw driver to hit quick connector release clip, but putting back on?