toofast
Active member
Afternoon...so I need to remove the props to fix a slight ding, but the manual references a SPECIAL TOOL.
Any idea what it is and where I can buy one ?
Below is what the manual says.
1 Take the igniton keys out of the ignition locks
.
2 Remove the spinner () using the special tool.
3 Undo the locking ring with the accompanying special tool by unscrew the four socket cap screws ().
Remove nut ()and locking ring (). Remove the forward propeller from the propeller shaft.
4 Undo the locking ring for the aft propeller with the accompanying special tool by unscrew the four
socket cap screws (). Remove nut () and locking ring (). Remove the aft propeller from the propeller
shaft.
5 Wipe the propeller shafts clean.
Any idea what it is and where I can buy one ?
Below is what the manual says.
1 Take the igniton keys out of the ignition locks
.
2 Remove the spinner () using the special tool.
3 Undo the locking ring with the accompanying special tool by unscrew the four socket cap screws ().
Remove nut ()and locking ring (). Remove the forward propeller from the propeller shaft.
4 Undo the locking ring for the aft propeller with the accompanying special tool by unscrew the four
socket cap screws (). Remove nut () and locking ring (). Remove the aft propeller from the propeller
shaft.
5 Wipe the propeller shafts clean.