This is what I was referring to:
"While packing the boat cooler for the weekend trip my wife placed 5 of the half sized bottles of water on the swimdeck for about 15 seconds while loading. Everything came together just right and they acted like magnafying glasses in the sun, burning / melting the Seadek! Wasn't her fault and i never thought of it either."
and this:
"Here's a photo of one of our SeaDek pads. You might be able to see how shiny the surrounding fiberglass is, and you might be able to see a burn mark, or "scar" on the right side of the pad. In less than one week of sun exposure, the pad was affected by the hot rays of the sun.
I contacted both Tyler Shealy of Castaway Customs, and SeaDek, and was pretty much told that this was typical when the rays of the sun are reflected off of nearby surfaces. They "melt" the SeaDek material.
It was suggested that we; cover any surrounding stainless steel with white tape to cut down on glare, put some plastic film on the surrounding fiberglass to minimize glare, or to have some protective covers made for the steps when they are not in use. You will not find any of these informative details in any of their literature. My call this morning to Customer Service was routed to voicemail.
I was also told that Flexiteek would be hotter to stand on. That's fine. My response was that we could wear shoes, or sit on a towel. Nothing made for a boat should be ruined this quickly due to sun exposure. We bought SeaDek for cosmetic reasons, so it would make the boat look good. Maybe I'm waxing the boat too much."