irishkid
Member
Temp gauge not reading, did some trouble shooting:
1. Pulled the plug of the sending unit and grounded it out, that's supposed to peg the gauge, it did nothing. Gauge stayed at at zero
2. Replaced the sending unit. Nothing.
3. Grounded out the plug wire with the new sending unit in, gauge read 150. Pull the ground, goes back to zero.
Gauge bad?
'95 27PC with 4.3's
1. Pulled the plug of the sending unit and grounded it out, that's supposed to peg the gauge, it did nothing. Gauge stayed at at zero
2. Replaced the sending unit. Nothing.
3. Grounded out the plug wire with the new sending unit in, gauge read 150. Pull the ground, goes back to zero.
Gauge bad?
'95 27PC with 4.3's