41PC 8.2 Gas Raw Water Impeller Replacement


M

mattm

New member
Does anyone have any tips on accessing the raw water impellers on gas 8.2 inboards in a 41PC? I can see the port unit but access is tough. I can't even see the starboard unit.
 
Have not worked on your model, but I had to hang upside down to get mine done

Close the seacock, remove serpentine belt then remove the bolts holding the pump bracket. Want to remove the pump and bracket and move to the bench
 
I have the Cummins diesels so they are different. The port engine raw water pump is very tough. Formula put in a small access hatch in the aft cabin bulkhead but it was way to small to work through so I cut a larger hole and put in a bigger hatch. The mechanic was able to get to it fairly easily then.
 
You must log in or register to reply here.
Back
Top