Recent content by 409

Yes, Shrink wrapped. I would do it again. protect your investment. It was also backwards on the trailer. Not sure of that reason but they did a great job.

Shipped my 34 with hardtop from TX to Long Island. No issues.Horizon Marine Transport-Brian, 321-544-9934

Hey Joe, Here are some pics of the Garmin Rudder Feedback Sensor. also a partial list of hardware i purchased. I drilled holes in the Transom Assembly to mount the sensor. 2 bolts are plenty. lol. Not sure why my photos are always upside down? Hope this helps.

I hear that. I have a zipper in the shrink wrap, but wont go down unless its 50 degrees or warmer. I try to bring my boat projects home. Where are you? working on the Generator drip pan and shelf over the winter.

Nice set up. This wheel is Isotta Daponte. Used on Formula 43SSC. Bought it from CP Performance. then got the centercap from Formula. Where did you put the AP Pump? I had someone fabricate a bracket.

Nice Upgrade. Are you adding Autopilot? Been there, Done that.

What is your water pressure? Guessing you have Vesselview. I just installed raw water pick ups and strainers on my 08 34PC-496 Bravo3. Its a great investment even if it’s not the current problem. Bravo 3 through transom is only 3/4” going into a 1.25” hoses. Not a great design. I had “slipper”...

Steering Wheel removed from 2008 34PC. Upgraded to hydraulic steering. Fits Spline Shaft only.Burled Wood, Leather, Stainless wheel.One inperfection on the leather (Right Side). Asking $150 plus the ride. Sport/Tilt Helm and cable also available PM me for Pics

Congratulations on your new boat!! I saw these on the Formula Website. 40PC. Were these available as an option on your boat? Im sure you can purchase them from Formula. I am interested in them as well.

Thanks for the links and advice. Formula never got back to me with a material list. I called SeaStar. They were very helpful. These are the part numbers of parts i already ordered. Steering Cylinder #HC5328-3 (needs 18" from existing power steering cylinder to starboard side). Hydraulic Helm...

Hi Advantage, I had a 2008 34PC with Hardtop transported from TX to NY last year. My Hardtop had to be derigged. Satellite TV Antenna, TV Antenna, Air Horns had to be removed.My transporter (Doug-Horizon Transport-321-794-1871) has a Low Boy trailer. I believe your boat is not as high as mine...

Good Luck! im in the same boat. i am installing new Garmin Chartplotter, Radar, and Autopilot. I assumed had hydraulic steering in my 2008 34PC. but i do not. i have T496-bravo3 with power steering. I called Formula to ask what to do. They said unless the boat was ordered with Axius, it has...

For Sale: Original TV antenna from 2008 34PC. The boat was a lake boat its whole life in TX until I bought last year. Not sure if it works or not. Have multiple NOS plastic base pieces. Original owner had SeaKing Satellite system, so im thinking he never used it either. Added radar and new...

Has anyone installed radar directly on the Hardtop? Looking at a 4 degree wedge from Seaview. I'm not sure if i need more angle? 6 Degree? I have a 2008 34PC with optional hardtop. I'm mounting a Garmin 4' open array Fantom unit. Any help would be great!

No instructions or hardware included. I Installed it myself in a little over an hour. Poly nuts and washers on the inside with a Vise Grip on the nut. I did take pictures of other PCs with this option. don't forget the sealant! I think my install is angled up a bit compared to factory...