Recent content by Home Aweigh II

I used a belt sander to level the floor to knock off the high spots and followed up with self leveling agent. Attached is a picture of the cherry wood floor I installed. HA II

This is the solution I chose. Purchased a stainless grabber from: UltraMarine West 8700 Warner Avenue #160, Fountain Valley, CA 92708 USA sales@ultramarinewest.com (714) 843.6964 Had to call them to get the SKU for my chain size and placed an order. I made my own bridle using 3 strand nylon...

WTB Kenwood KAC 425 Amplifier Looking for a Kenwood KAC 425 Amplifier. Can't find one in a store or on the I'net. Do any of you folks that have upgraded have one on the shelf? Send me a PM with the specifics. Home Aweigh II

I have a '95 31PC and my house battery voltage drops from12.9V to 11.5V overnight. All power to the boat is disconnected, house and starting battery switches are off and all panel switches are off. I've disconnect all power to everything I know that stays connected to the house battery, bilge...

Finally finished the re-laminate project and the Admiral is happy. The head door matches the rest of the galley project. HA II

How can I change my signature so it doesn't look like this: '95 31 PC, T7.4L, BIII's<br />Connecticut River<br />Glastonbury, CT HA II

FT, That's an "Attaboy" for sure. Looks great and will save hours cleaning the rugs on the stairs. Question, I need to get to the second stanchion on the starboard side. Does the panel directly above the dinnette come out first? HA II

I have 4 Interstate batteries on my PC. 1 group 24 for the generator. 2 group 27M's in parallel for house batteries and 1 group 27 deep cycle as the starting battery Only the ground terminal on the starting battery develops corrosion. Does anyone have any ideas as to the cause? HA II

Finally finished one of the two winter projects I scheduled. Colder than usual winter, plus more snow this year put me way behind. This project went more smoothly than I expected one down and one to go, the Raymarine autopilot install is next. HA II

FYI I replaced the microwave in out '95 31PC with a MAGIC CHEF, MODEL MCD770W, .7 CU.FT., 700 W. I found it at the Home Depot. I had to cut a 1/4" off the top of the trim that is attached below the microwave. Check out the photo.

Does anyone have a vendor name and model number of LED replacement bulbs for the ceiling lamps in a'95 31PC? Home Aweigh II

I'm trying to locate the check valve that prevents "city water" from entering the fresh water tank. I'd appreciate any feed back form some one that's been there done that. I want to install a bypass loop and fill the tank using the city water fill. I pulled the refrigerator out and couldn't...

I purchased upper and lower nylon door sliders for my '95 31PC. I replaced the upper sliders easily. However I can't remove the old lower sliders or install the new ones even with the door removed. It looks like they should slide in/out the end of the track on the port side. There's not enough...

I've developed a water leak under the forward berth. It's either the water tank itself or a waterline. I've removed all the visible screws under the mattress and am unable to uncover the water tank and lines. I'm at a loss for what to do next.