Search results

Anyone know what size helm is used on the 310 with twin Verado OB's? Sent a email to Tech support but no answer yet

Anyone thinking about a 27 to 29 BR with twin OB? I bought a 2023 Chap 280 OSX because Formula didn't make one. Has been a real bummer so far. The boat looks good but is no way a Formula, but fit finish, design and access to compartments is minimal at best. Funny sad part, a Chap 280 is...

Did a dumb thing, bought a 22lb galvanized claw anchor and didn't measure before buying. It won't fit Sell it for $80 plus ship

100% fresh water in Kentucky Custom 509 MEFI3 MPI built 530HP 580LB FT Torque motor by Young Performance Juliet, TN in 2015 ($21,000) Bravo 3 XR drive and HP Gimbal assembly (new 2015 $9800) Kohler Gen with 91 hours, Vac-U-Flush head with 24 Gal holding tank Has AC and Heat with CO detector...

Anyone get an enclosure made with Lexan instead of Isinglass? Should be much easier to see thru, but then there is storage when not using

Looking for amount of clearance between exhaust elbows and hatch with a BBC? Wondering if I can install a high rise exhaust under it

Anyone have a motor with Cat's ? If so can we get some temps on the Manifolds at idle, and cruise speed? Have had questions on other forums and trying to run down if there is an issue or not. The questions come from folks bypassing the CAT sensors and talking about the Man's being 170 to 190...

Fresh water lake 1st time anchor was stuck it was in 40 ft of water and storm moving in. Laid the chain out toward shore and pick a spot on shore, was a steep bank. Bottom was mostly mud and tree stumps. Came back next day with dive gear and a buddy. We went to the bottom and I started...

Looking to replace my 27PC with a bowrider. Want anchor windlass and pump out head. Don't want CATs but maybe pull the motor from my PC and install in a 270. If the 270 has Cats pull that motor and put on shelf until I want to sell it. Don't want to get into the legal crud, so skip all that...

Anyone replace there anchor locker latch. Mine is white 2 ID and bought one from Amazon and the cheap latch won't even retract all the way. Also had to file a bit where the 2 cheap screws where used to hold it together. Need a good latch or if someone knows the OEM Edit: looks like it uses...

Fella on OSO forum is looking for the hull length of the 370SS. Not total length from bow to swim deck, but from transom to bow. Anyone have one out of the water? He emailed TAG but no response

Who will admit to NOT doing maintenance on their windless. I admit it, I'm not Decided to have a look at my 1994 Maxwell 500. Have not done the first thing to it ever, and it has never failed me, so maybe on borrowed time. The manual says to take it apart to grease at least once a year...

In an attempt to shorten the story and stick with highlights Sister has a 52 something footer yacht and has been trying to sell it for a few years. Its has always been in fresh water but she has had enough and plans to move to the gulf. She means well but doesn't (I think) fully understand...

Found what appears to be a brand new VP out drive on an online auction. Is for the Kentucky, Laurel County sheriff's office of seized property SERIAL #A880723 PRODUCT #21615545 TYPE 2.32.DPS-B I have no use for it but someone else might. Has to be picked up at end of auction and there is a...

There is a guy on OSO which has a cushion he is giving away for a 292, but have to pickup in Mchenery IL https://www.offshoreonly.com/forums/formula/357944-merry-christmas-free-292-filler-cushion.html

Many may know this but just in case others do not. When a boat is documented the vessel's info and current and past owners are listed forever. If you have a boats name and the name is used by more then one, they are all listed along with port of call. If you have a boat name that there are...

Going to try to keep this short, even though it has been going on for a long time. Wonder if anyone has ever installed these things? Last year (July 2017) while putting my boat on the lift I forget to raise the trim tab and cracked the upper hinge. So ordered another hinge and then found out...

Looked for website area, but missing it. When getting emails, the entire length is being cut short. Everyone of them for the past couple days are missing "’t-start&goto=newpost" The entire link is there like...

Anyone have any recommendations for GoPro video editing using Win7 ? I downloaded a free GoPro something or another and it didn't work very well. Would like to cut down the original length of the vid, put some words pointing out things.

Anybody know what Formula uses to delay the alarm from turning ON when the key is turned to ON?