Search results

2010 Formula 45, I'm having an issue with my cockpit TV. Can anyone tell me where it gets its power from? Is there an outlet somewhere in the hardtop or is it hardwired somewhere? It's turns on and off with the starboard outlet breaker. I think I have loose connection.

Really hoping that I never actually need this information but I'm curious to hear from those who have been down this road. What is the process for removing the motors on a diesel 400ss? Drives and hatch obviously has to come off but after that how much work is involved. I would think a lull...

Before After

I'll play...

So this is what I came up with. Nobody made a mount I liked so I built one in the shop, and had my powder-coater take it from there. I think it turned out great, looks like it could have came form the factory... Sorry, not sure why these pictures rotated like this...

I'm thinking about installing one on my 07. Does anyone have one, I would like to see how and where is it mounted...

I went through this a while back. I have an 07 400SS with diesels and EVC-C with the same displays as jlanka. You can not swap those displays with the 7" or even the color 4" displays. Maybe if you start changing EVC computers but even then I couldn't get a straight answer from my tech or...

I figured I would post this in case anyone wants to replace theirs... I looked everywhere and could not find a replacement that was same size. The Tappen in 9-5/8" tall, and the smallest thing I could find was 10.2" tall. Either way I pick up the smallest thing I could find at Walmart and...

I was able to get my switch covers off without removing the switch from the panel. It seem strange that they would glue yours, mine just snapped off. I redid my dash a month ago, along with a ton of other work. I need to redo my switch panels but I'm not looking forward to pull every wire to...

I want to have a small inflatable for an upcoming trip. Curious what others have done as far as storage. Any info or pictures would be great.

Here is what I came up with on this... Seems to work pretty well. I'll snap a few pictures of where the hose hook up are when I'm down at the boat later today.

I was doing some work in the bilge this weekend and decided to check my float switches. There are a total of 5 float switches in the bilge. 2 on the port side and 3 on the starboard side. Lower switch on the port side turns on the port pump (like it should). Lower side on the starboard side...

I know there are a few guys with d6's and DPH outdrives on here. How are you guys flushing your motors? Muff's or are you using something else? I tried to flush with muff's last weekend and couldn't get any water to come out of the exhaust. I'm I doing something wrong? I just moved from a...

I have a 2007 400SS with D6-350's. The boat didn't come with autopilot and I want to add it. I have a Garmin 7612xvs so I need something compatible. I'm pretty sure I have full hydraulic steering and not steer by wire. This is what I think that I need but I'm not sure...

My boat didn’t come stock with autopilot but I would like to add it. I have new garmin electronics 7612xvs. I’m pretty sure I have fully hydraulic steering and not steering by wire. It’s a 2007 400SS with d6 350’s and DPH outdrives. Think this is what I would use...

Post on thehulltruth too but maybe some here can help me out... new to me boat with a garmin 7612 & a airmar b60 transducer that was factory installed. Everything was working just fine for a while and I was able to get depth and see bottom. The last few times I have been out it will stop...

My Tappen microwave has officially shit the bed. Has anyone found a replacement that fits in the hole? Boat is a 2007 400SS I tried the one mentioned in this thread and it will not fix. I emailed TAG a few days and no response...

07 400SS with d6 350’s, has anyone on the forum replaced the shift cables? I’m getting an EVC error “check shift actuator”. Everything I read says the shift cables are probably to blame. I emailed Bryan at TAG for some info and I’m waiting hear back. Does the drive have to come off to fix...

2007 D6 with outdrives... Starboard engine will not trim, port engine will. I took a look and the starboard side is definitely low on fluid. I didn't have any on hand to top it off but I don't here the pump running. Is the EVC system "smart enough" to know it's low on fluid and would stop...

First weekend on the new boat and we are still learning and figuring stuff out. We were putting the bedding together in the mid cabin and noticed the carpet near the back wall below the mirror was damp. First thought was maybe the window leaked when I was washing the boat but there is nothing...