Search results

So the cabin steps are completely delaminating and as many of you know, they are impossible to remove and refinish at least without massive amounts of pain. Does anybody have any ideas of what I could use to cover the leading edge and still make it look like it was meant to be there? Sent...

I have a Isotherm Cruise 200 (side by side doors) in my 40PC https://www.indelwebastomarine.com/u...ainless-steel/ Turns out I now have a leak that only shows itself over the winter. Meaning I hired a local tech (who really did not know much) who used a vacuum pump to pull out all the old...

This winter I need to replace the "foam" inside the sound enclosure. It has "broken down" and fallen into the moving parts of the unit. However, for the live of me, I can't figure out how to remove the top panel, where most of the work needs done. Below are a few pictures...any ideas ? 2009...

I swear I saw someone use something like this, but my searching is failing me. https://www.wholesalemarine.com/johnson-ultima-automatic-bilge-pump-switch/?gclid=Cj0KCQjwyZmEBhCpARIsALIzmnJ7S2ZiklvBRc9C6E59G3Js4ECo1bp4nWHyrd-a2NWiLBgPbgKCPBUaAoxBEALw_wcB Any one use something like this, and...

Hello and Happy New Year. I am trying to interface my new Axium LH3 Display with my Engines to get my new Display to show a bunch of data (i hope) that my legacy Volvo Vessel View will not display. So Raymarine helped me out, but now I just need to figure out what network is my J1939. I know...

Hello... Strange issue. Ran my genny for the first time....ran for 8 hours no issue. Came back to dock, checked this out and my overflow remote tank was void of Anti Freeze for Genny. Figured no worries, will top her off.... Did that, fired up genny and it started DRINKING the Anti Freeze...

hello everyone.... so i know the systems in our 40's are not perfect, but before i invest a ton, i need to at least fix this problem. (next on my list now that i finally got my strainers to stop leaking with the upgrade kit) when i fade (100%) my music to the cockpit speakers, the sub totally...

When removing my ocean leds, i did this damage. my new lights will go right across the damage, so i must do something to fix that. my buds are giving me all kinds of advice, but i trust you the best. i am also concerned it needs to be PERFECTLY flat or i will never get the new lights...

Just curious if anybody has tips for removing underwater lights. My ocean LEDs are bad and I have all the backing plates out but not doing too well cutting through the 4200 on the outside with a putty blade and I think that's my only option. Sent from my SM-G960U using Tapatalk

Any chance anyone knows where to get these from ?

Under water lights have barely been used in boat, but yet I just had my stbd side one fail. The connections are solid and it went from bright to dim to black. Is there any "bright" ideas or is this a replacement that will cost we may too much $$ over the winter. I can't imagine these high end...

I have a Isotherm Cruise 200 (side by side doors) in my 40PC https://www.indelwebastomarine.com/us/products/fridges-freezers/cruise-marine-refrigerators/xlarge-fridges-165-320-l/cruise-200-inox-stainless-steel/ It worked fine the last 2 years....then out of nowhere the fridge side refuses to...

Buddy of mine down the dock has a 97 41PC and he is trying to replace his "trim rings" around these lights. The lights are all good, but the rings are a bit beat. Below is a picture....any idea where you might find such a replacement or do we think he has to replace the entire light(s) to get...

So I had to replace my wiper motor on STBD Side...and of course that means the whisper wall ceiling has to come down. I hired the local formula dealer, who worked with Formula to get the tool and how my headliner comes down, etc. I was just too worried I would damage it. Well, the local...

Hello... Trying to setup a new MFD and the Raymarine Axiom is asking me what channel (B70/B79), (B60) etc... I think it is really asking me the Model (I think) Does this sound familiar to anybody... If not, any idea what Model Airmar we all might have, assume most 2007-2012 PC's where about...

I've started quite a project to upgrade my electronics as my classic e-120 died on me. Spent time today trying to understand what I do and don't know. The digital radar voltage converter (vcm1000) mentioned that it needs connected to the RF ground system....or if I don't have one I can connect...

Hello.... So I know my headliner has to come down (dang Formula, there must be a better way) to replace my STBD wiper motor. It runs, but the spindle just moves around a bit and does not sweep, so assume some linkage is wacked. I've been told that motor is $250 (ouch) to replace...so does...

Afternoon...so I need to remove the props to fix a slight ding, but the manual references a SPECIAL TOOL. Any idea what it is and where I can buy one ? Below is what the manual says. 1 Take the igniton keys out of the ignition locks . 2 Remove the spinner () using the special tool. 3 Undo...

Well my first how in the heck issue with my newish to me 40PC. Attached are a few pictures of wet carpet I have right near the floor by the first step up on the port side of the forward bed. The main water tank is empty, so it can't (or shouldn't be that), I've check all the rail above...

Hopefully this will make sense, as my pictures somehow did not work. Getting ready for my first "real" trip and in doing a once over I found the shower door has "broken loose" from it's "hinge". I say "hinge" because it just appears that the TRACK that the edge of the door sits in has come...